首页>师资队伍>师资概况>>
姓      名: 肖林
职      称: 教授
所在院系: 强度室
联系电话: 82668714
个人主页: #
E-MAIL: lxiao@mail.xjtu.edu.cn
专业方向: 金属材料强度
个人详情

研究领域或方向

l  研究领域一

亚微米尺度下钛合金单晶的变形晶体学及尺度效应

l  研究领域二

纳米梯度钛及锆合金管材双轴循环变形行为及塑性变形机理

l  研究领域三

服役条件下新型钛及锆合金变形损伤特性及其多重约束耦合响应

 

工作经历

l  工作经历一

1999, 9年起受聘为西安交通大学材料科学与工程学院教授

l  工作经历二

2002, 22005, 7  加拿大Manitoba大学机械工程系

 

教育经历

19831987:南京理工大学(原名:华东工学院)材料科学系  本科

19871990:天津大学材料科学系  硕士

19901994:西安交通大学材料科学系  博士生

19941996:西安交通大学力学系  博士后

19992001:日本  大阪大学材料科学系JSPS外国人特别研究人员

 

科研项目

l  科研项目一

国家自然科学基金面上项目:表面梯度纳米锆-铌合金管材双轴变形损伤行为。

l  科研项目二

国家自然科学基金面上项目:亚微米尺度下Beta钛合金单晶力学行为及变形机理研究

l  科研项目三

国家重点基础研究发展计划973项目:新型钛合金微观组织结构相场动力学模拟和力学性能表征

l  其它主持过的科研项目

国家自然科学基金重点项目:微米金属单晶的变形行为及其晶体学与尺度效应

国家重点基础研究发展计划973项目:钛合金变形损伤及其多重约束耦合响应。

国家自然科学基金面上项目:微尺寸钛-铝合金单晶试样压缩变形机理及其尺度效应

国家自然科学基金面上项目:含氢诱发纳米团块区锆-4合金的双轴疲劳行为及数值模拟

国家自然科学基金面上项目:双轴加载下不同氢含量锆合金变形行为及数值模拟

国家自然科学基金青年基金项目:复合加载下锆合金的位错结构的微观分析和数值模拟

核工业科学基金项目:双轴加载下锆合金的疲劳行为及位错亚结构

国家教委新世纪人才基金项目:非比例加载下含氢诱发纳米团块区锆-4合金的循环变形行为

教育部优秀青年教师资助计划项目:复合加载下含氢诱发纳米团块区锆-4合金的循环变形行为

霍英东青年教师基金项目:含氢化物锆合金复合加载下变形行为及数值模拟

 

学术成果

l  学术成果一:主要的学术论文

1.        Junqiang Ren, Qiaoyan Sun, Lin Xiao*, Jun Sun. (2017): Temperature and strain rate effect of the deformation-induced phase transformation in pure titanium nanopillars oriented along [0001], Computational Materials Science, 126, 66-73.

2.        Wei Chen, Jinyu Zhang, Shuo Cao, Yan Pan, Mingde Huang, Qingmiao Hu, Qiaoyan Sun, Lin Xiao, Jun Sun. (2016): Strong deformation anisotropies of w-precipitates and strengthening mechanisms in Ti-10V-2Fe-3Al alloy micropillars: Precipitates shearing vs precipitates disordering, Acta Mater. 117: 68-80.

3.        Qi Wang; Qiaoyan Sun; Lin Xiao*; Jun Sun. (2016): Torsion fatigue behavior of pure titanium with a gradient nanostructured surface layer, Mater. Sci. Eng. A, 649, 359-368.

4.        Qi Wang, Qiaoyan Sun, Lin Xiao*, Jun Su. (2016) Effect of Surface Nanocrystallization on Fatigue Behavior of Pure Titanium, Journal of Materials Engineering and Performance, 25, 241-249.

5.        Changsheng Tan, Xiangli Li, Qiaoyan Sun, Lin Xiao, Yongqing Zhao, Jun Sun. (2015): Effect of α-phase morphology on low-cycle fatigue behavior of TC21 alloy, Fatigue, 75, 1-9.

6.        Ren, Junqiang, Sun, Qiaoyan, Xiao, Lin*, Ding, Xiangdong, Sun, Jun. (2014) Size-dependent of compression yield strength and deformation mechanism in titanium single-crystal nanopillars orientated [0001] and [11-20], Mater. Sci. Eng. A, 615, 22-28.

7.        Ren, Junqiang, Sun, Qiaoyan, Xiao, Lin*, Ding, Xiangdong, Sun, Jun. (2014) Phase transformation behavior in titanium single-crystal nanopillars under [0001] orientation tension: A molecular dynamics simulation, Computational Materials Science, 92, 8-12.

8.        Zhao, H. Z., Xiao, L. *, Ge, P., Sun, J., Xi, Z. P. (2014) Hot deformation behavior and processing maps of Ti-1300 alloy, Mater. Sci. Eng. A, 604, 111-116.

9.        Wang, Qi, Yin, Yanfei, Sun, Qiaoyan, Xiao, Lin*, Sun, Jun. (2014) Gradient nano microstructure and its formation mechanism in pure titanium produced by surface rolling treatment, J Materials Research, 29(4), 569-577.

10.    J. Ren, Q. Sun, L. Xiao*, X. Ding, J. Sun. (2013) Molecular dynamics simulations of the size effect of titanium single-crystal nanopillars orientated for double prismatic slips, Phil. Mag. Lett., 93(10), 583-590.

11.    L. Xiao, R. Liu, S. Esmaeili, Y. Zhou. (2013): Heterogeneous Nucleation on Inoculant Particles in the Fusion Zone of Welds during Non-equilibrium Solidification, Metall. Mater. Trans. A, 44, (accepted).

12.    Z.Y. Song, Q.Y. Sun, L. Xiao*, J. Sun, L.C. Zhang, X.D. Guo, X.D. Li. (2013): Age Hardening and Its Modeling of Ti-2.5Cu Alloy, Mater. Sci. Eng. A, 568, 118-122..

13.    W. Chen, L. Xiao*, Q.Y. Sun, J. Sun. (2012): Effect of the Initial Grain Size on Grain Refinement in Ti-2Al-2.5Zr Alloy Subjected to Multi-impact Process, Mater. Sci. Eng. A, 554, 86-94.

14.    D. Montiel, L. Liu, L. Xiao, Y. Zhou, N. Provatas. (2012) Microstructure Analysis of AZ31 Magnesium Alloy Welds Using Phase Field Models, Acta Mater., 60, 5925-5932.

15.    H. Wang, Q.Y. Sun, L. Xiao, J. Sun. (2012): Effect of Grain Size on Twinning Behavior in Ti-2Al-2.5Zr Alloy Fatigued at 77K, Mater. Sci. Eng. A, 542, 1-7.

16.    L. Liu, L. Xiao, D.L. Chen, J.C. Feng, S. Kim, Y. Zhou. (2013): Microstructure and Fatigue Properties of Mg-to-Steel Dissimilar Resistance Spot Welds, Mater. & Design, 45, 336-342.

17.    W. Chen, Q.Y. Sun, L. Xiao*, J. Sun. (2012): Deformation-Induced Grain Refinement and Amorphization in Ti-10V-2Fe-3Al Alloy, Metall. Mater. Trans. A, 43(1), 316-326.

18.    W. Chen, Q.Y. Sun, L. Xiao, J. Sun. (2012): Thermal Stability of Bulk Nanocrystalline Ti-10V-2Fe-3Al Alloy, Mater. Sci. Eng. A, 536, 223-230.

 

19.    Q. Sun, Q. Guo, X. Yao, L. Xiao, J.R. Greer, J. Sun. (2011): Size Effects in Strength and Plasticity of Single Crystalline Titanium Micro-Pillars with Prismatic Slip Orientation, Scripta Mater. 65, 473-476.

20.    Z.Y. Song, Q.Y. Sun, L. Xiao*, J. Sun, L.C. Zhang. (2011): Precipitation Behavior and Tensile Property of the Stress-aged Ti–10Mo–8V–1Fe–3.5Al Alloy, Mater. Sci. Eng. A, 528, 4111–4114.

21.    L. Xiao, R. Liu, S. Esmaeili, Y. Zhou. (2012): Microstructure Refinement due to the Addition of Titanium Particles in AZ31 Magnesium Alloy Resistance Spot Welds, Metall. Mater. Trans. A, 42, 43, 598-609.

22.    L. Xiao, L. Liu, D.L. Chen, S. Esmaeili, Y. Zhou. (2011): Resistance Spot Weld Fatigue Behavior and Dislocation Substructure in Two Different Heats of AZ31 Magnesium Alloy, Mater. Sci. Eng. A, 529, 81-87.

23.    L. Liu, L. Xiao, J. Feng, L. Li, S. Esmaeili, Y. Zhou. (2011): Bonding of Immiscible Mg and Fe Via a Nanoscale Fe2Al5 Transition Layer. Scripta Mater. 65, 982-985.

24.    F.W. Long, Q.W. Jiang, L. Xiao, X.W. Li. (2011): Compressive Deformation Behaviors of Coarse- and Ultrafine-Grained Pure Titanium at Different Temperatures: A Comparative Study, Mater. Trans., 52, 1617-1622.

25.    Q.W. Jiang, L. Xiao, X.W. Li. (2011): A Comparison of Temperature-Dependent Compressive Deformation Features of Ultrafine-Grained Ti and Cu Produced by ECAP. Mater. Sci. Forum, 682, 41-45.

 

26.    Qian Yu, Zhi Wei Shan, Ju Li, Xiao Xu Huang, Lin Xiao, Jun Sun, Evan Ma. (2010): Strong Crystal Size Effect on Deformation Twinning, Nature, 463(7279), 335-338.

27.    L. Xiao, R. Liu, Y. Zhou, S. Esmaeili. (2010): Resistance Spot Welded AZ31 Magnesium Alloys, Part I: Dependence of Fusion Zone Microstructures on Second-phase Particles, Metall. Mater. Trans. A, 41(6), 1511-1522.

28.    L. Liu, L. Xiao, J.C. Feng, Y.H. Tian, S.Q. Zhou, Y. Zhou. (2010): Resistance Spot Welded AZ31 Magnesium Alloys, Part II: Effects of Welding Current on Microstructure and Mechanical Properties, Metall. Mater. Trans. A, 41(10), 2642-2650.

29.    L. Liu, L. Xiao, J.C. Feng, Y.H. Tian, S.Q. Zhou, Y. Zhou. (2010): The Mechanisms of Resistance Spot Welding of Magnesium to Steel, Metall. Mater. Trans. A, 41(10), 2651-2661.

30.    Z.Y. Song, Q.Y. Sun, L. Xiao*, L. Liu, J. Sun. (2010): Effect of Prestrain and Aging Treatment on Microstructures and Tensile Properties of Ti–10Mo–8V–1Fe–3.5Al Alloy, Mater. Sci. Eng. A, 527, 691–698.

31.    H. Wang, Q.Y. Sun, L. Xiao*, J. Sun, P. Ge. (2010): Low-cycle Fatigue Behavior and Deformation Substructure of Ti-2Al-2.5Zr Alloy at 298 and 673K, Mater. Sci. Eng. A, 527, 3493-3500.

32.    W. Chen, Q.Y. Sun, L. Xiao*, J. Sun. (2010): Deformation-Induced Microstructure Refinement in Primary Alpha Phase-Containing Ti-10V-2Fe-3Al Alloy, Mater Sci Eng. A, 527, 7225-7234.

33.    W. Chen, Z.Y. Song, Q.Y. Sun, L. Xiao*, W.B. She, J. Sun, P. Ge. (2010): Effect of Solution Treatment Temperature on Trigger Stress Induced Matensitic Transformation in Ti-10V-2Fe-3Al Alloy, J Solid Mech. & Mater. Eng. 4(8), 1296-1305.

34.    Lin Xiao*, Qian Yu, Qiaoyan Sun, Jun Sun. (2010): Size Effect of Deformation Mode in Micron-sized Ti-5Al Single Crystal Loaded along [2-1-10] and [0001], Inter J Modern Physics B, 24(15&16), 2466-2471.

 

35.    H. Wang, Y.L. Xu, Q.Y. Sun, L. Xiao*, J. Sun, P. Geng. (2009): Effect of Grain Size and Testing Temperature on Low Cycle Fatigue Behavior and Plastic Deformation Mode of Ti-2Al-2.5Zr, Metall. Mater. Trans. A, 40(11), 2631-2643.

36.    Z.Y. Song, Q.Y. Sun, L. Xiao*, L. Liu, H. Wang, W. Chen, J. Sun. (2009): The Influence of Prior Cold Deformation on Precipitation of Alpha Phase and Variation of Hardness in Ti-10Mo-8V-1Fe-3.5Al during Aging Treatment, J Mater. Research, 24, 452-458.

37.    X. Yao, Q.Y. Sun, L. Xiao, J. Sun. (2009): Effect of Ti2Cu Precipitates on Mechanical Behavior of Ti-2.5Cu Alloy Subjected to Different Heat Treatments, J Alloys and Compounds, 484, 196-202.

38.    W. Chen, Z.Y. Song, L. Xiao*, Q.Y. Sun, J. Sun. (2009): Effect of Prestrain on Microstructure and Mechanical Behavior of Aged Ti-10V-2Fe-3Al Alloy, J. Mater. Research, 24(9), 2899-2908.

 

39.    L. Xiao*, D.L. Chen, M.C. Chaturvedi. (2008): Cyclic Deformation Mechanisms of Precipitation-hardened Inconel 718 Superalloy, Mater. Sci. Eng. A, A483-484, 369-372.

40.    Q.Y. Sun, L. Xiao, J. Sun. (2007): Impact Toughness of Titanium Alloys with Different Strengthening Methods, Key Eng. Mater. 353-358, 433-437.

 

41.    L. Xiao, D.L. Chen, M.C. Chaturvedi. (2006): Effect of Boron and Carbon on Thermomechanical Fatigue of IN 718 Superalloy: Part I. Deformation Behavior, Mater. Sci. Eng. A, A437 (2), 157-171.

42.    L. Xiao, D. L. Chen, M. C. Chaturvedi. (2006): Effect of Boron and Carbon on Thermomechanical Fatigue of IN 718 Superalloy: Part II. Deformation Microstructures, Mater. Sci. Eng. A, A437 (2), 172-182.

43.    L. Xiao, D.L. Chen, M.C. Chaturvedi. (2006): Effect of Boron on the Fatigue Crack Growth Behavior in Alloy IN 718 at RT and 650°C, Mater. Sci. Eng. A, A428, 1-11.

 

44.    L. Xiao, D.L. Chen, M.C. Chaturvedi. (2005): Low Cycle Fatigue Behavior of Inconel 718 Superalloy with Different Concentrations of Boron at Room Temperature, Metall. Mater. Trans. A, 36A(10), 2671-2684.

45.    L. Xiao, D. L. Chen, M. C. Chaturvedi. (2005): Effect of Boron and Carbon on the Fracture Toughness of IN 718 Superalloy at RT and 650°C, J Mater. Eng. Performance, 14(4), 528-538.

46.    Xiao Lin*. (2005): Twinning in the Ti-5 at.% Al Single Crystals during Cyclic Loading along [0001], Mater. Sci. Eng. A, 394, 168-175.

47.    L. Xiao, D.L. Chen, M.C. Chaturvedi. (2005): Shearing of g² Precipitates and Formation of Planar Slip Bands in INCONEL 718 during Cyclic Deformation, Scripta Mater. 52(7), 603-607.

 

48.    L. Xiao, D.L. Chen, M.C. Chaturvedi. (2004): Effect of Boron on the Low Cycle Fatigue Behavior and Deformation Structure of Inconel 718 at 650°C, Metall. Mater. Trans. A, 35A(11), 3477-3487.

49.    Xiao Lin*, Umakoshi Yukichi. (2004): Cyclic Deformation Behavior and Dislocation Structure of Ti-2 at.% Al Single Crystals Oriented for Double Prism Slip, Metall. Mater. Trans. A, 35A(9), 2845-2852.

 

50.    Xiao Lin*, Umakoshi Yukichi. (2003): Cyclic Deformation Behaviour and Saturation Bundle Structure in Ti-5 at.% Al Single Crystals Deforming by Single Prism Slip, Phil. Mag. 83(30), 3407-3426.

51.    Xiao Lin*, Umakoshi Y. (2003): Orientation Dependence of Cyclic Deformation Behavior and Dislocation Substructures of Ti-5at%Al Single Crystals, Mater. Sci. Eng. A, 339, 63-72.

 

52.    Xiao Lin*, Umakoshi Yukichi. (2002): Cyclic Deformation Behaviour and Dislocation Structure of Ti-5 at.% Al Single Crystals Oriented for Double Prism Slip, Phil. Mag. A, 82(12), 2379-2396.

53.    Xiao Lin*, Umakoshi Yukichi. (2002): Planar Dislocation Bands Formed in Ti-5 at.% Al Single Crystals Deforming by Double Prism Slips, J Mater. Sci. Lett. 21(7), 517-519.

54.    X.D. Ding, Z.H. Jiang, J. Sun, J.S Lian, L. Xiao. (2002): Stress-Strain Behavior in Initial Yield Stage of Short Fiber Reinforced Metal Matrix Composite, Composites Science and Technology, 62(6), 841-850.

 

55.    Xiao Lin*, Umakoshi Yukichi, Sun Jun. (2001): Cyclic Deformation Behavior and Microstructures of Hydrided Zircaloy-4 under Biaxial Loading, Metall. Mater. Trans. A, 32(11), 2841-2850.

56.    Xiao Lin*, Umakoshi Yukichi, Sun Jun. (2000): Biaxial Low Cycle Fatigue Properties and Dislocation Substructures of Zircaloy-4 under In-Phase and Out-of-Phase Loading, Mater. Sci. Eng. A, 292, 40-48.

57.    Xiao Lin*. (2000): Cyclic Deformation Behavior and Dislocation Structures of Hexagonal Zircaloy-4 under Out-of-Phase Loading, ASME J Engng. Mater. Tech. 122(1), 42-48.

58.    Xiao Lin*, Gu Haicheng. (1999): Low Cycle Fatigue Properties and Microscopic Deformation Structure of Zircaloy-4 in Recrystallized and Stress-Relieved Conditions, J Nuclear Mater. 265, 213-217.

59.    Xiao Lin*, Gu Haicheng. (1998): Plastic Energy Dissipation Model for Lifetime Prediction of Zirconium and Zircaloy-4 Fatigued at RT and 400°C, ASME J Engng. Mater. Tech. 120(2), 114-118.

60.    Xiao Lin*, Bai Juli. (1998): Stress Relaxation Properties and Microscopic Deformation Structure of H68 and QSn6.5-0.1 Copper Alloys at 353K, Mater. Sci. Eng. A, 244, 250-256.

61.    Xiao Lin*, Gu Haicheng. (1998): High Cycle Fatigue Properties and Microstructure of    Zirconium and Zircaloy-4 under Reversal Bending, Mater. Sci. Eng. A, 252, 166-173.

62.    Xiao Lin*, Gu Haicheng. (1997): Dislocation Structure in Zirconium and Zircaloy-4 Fatigued at Different Temperatures, Metall. Mater. Trans. A, 28, 1021-1033.

63.    Xiao Lin*, Kuang Zhenbang. (1996): Biaxial Path Dependence of Macroscopic Response and Microscopic Dislocation Substructure in Type 302 Stainless Steel, Acta Materialia, 44, 3059-3067.

64.    Xiao Lin*, Gu Haicheng. (1994): Dislocation Structure of Zircaloy-4 Low-Cycle Fatigued at 873K, Scripta Metall. Mater. 30, 175-178.

65.    Xiao Lin*, Gu Haicheng. (1994): Cyclic Deformation Behavior and Microstructure of a Commercial-Purity Zirconium, Inter. J Fatigue, 16, 417-422.

l  学术成果二:授权专利

1.   肖林,王启,孙巧艳,尹雁飞,张宏宝,任军强,孙军.一种对金属表面进行梯度纳米化的方法,申请号:201310185394.8(已收到授予发明专利权通知书)。

2.   肖林,陈威,孙巧艳,孙军.一种低温下制备难变形金属块体纳米晶的方法.申请号:201310127478.6(已收到授予发明专利权通知书)。

3.   肖林,孙巧艳,陈威,小能量多次冲击技术制备块体纳米材料方法. 专利号ZL201010286615.7, 授权日期2011年9月18日。

4.   孙巧艳,宋振亚,孙军,肖林,刘力,陈威. 一种提高冷成型β钛合金时效后塑性的热处理工艺. 专利号ZL 200810232780.7, 授权日期2010年8月18日。

5.   孙军,陈威,孙巧艳,宋振亚,肖林,余倩. 一种加工微米/亚微米块体试样的方法. 专利号ZL200810017630.4, 授权日期2010年6月23日。