首页>科研成果>文章>>
论文题目 作者 刊物名称 发表时间
Study on the Microstructure and the Electro-Chemical Properties of Ml0.7Mg0.2Ni2.8Co0.6 Hydrogen Sto Rui Tang and Yongning Liu INT J HYDROGEN ENERG 0000-00-00
Fragmentation Study of Interfacail Shear Strength of Single SiC Fiber Reinforced Al After Fatigue Liu Yongning, Kang Wei and He Jiawen MAT SCI ENG A-STRUCT 0000-00-00
Influence of soft interlayer on crack growth behavior in bimetal Jia Purong, Li Nian, He Jiawen KEY ENG MATER 0000-00-00
Cracking in the soft interface layer of an Al-alloy laminate He Jiawen, Jia Min, Wen Shengpin INT J FATIGUE 0000-00-00
Structure and growth of basal and random oriented MoSx coatings deposited by magnetron sputtering Zhang Xiaoling, He Jiawen J VAC SCI TECHNOL A 0000-00-00
Different tribological behavior of MoS2 coatings under fretting and pin-on-disk conditions Zhu Xiaodong, He Jiawen SURF COAT TECH 0000-00-00
Interface toughening of Al-Cu laminate composite Fu Yonghui, Cui Jianguo, He Jiawen MAT SCI ENG A-STRUCT 0000-00-00
Synthesis and properties of graphite-like-carbon by ion beam assisted deposition Huang He, Wang Xuegang, He Jiawen MATER LETT 0000-00-00
Low-friction MoSx coatings resistant to wear in ambient of low and high relative humidity Zhang Xiaoling, Zhu Xiaodong, He Jiawen TRIBOL LETT 0000-00-00
Preparation and characterization of superhard boron-suboxide films Huang He, Wang Conghe, He Jiawen J VAC SCI TECHNOL A 0000-00-00
A worm-like trace of cathode spots on Cu-Zr-Ti amorphous ribbons CY Zhang, ZM Yang, YP Wang, BJ Ding J PHYS D APPL PHYS 0000-00-00
Cathode spot propagaton on the surface of amorphous, nanocrystalline and crystalline Cu60Zr28Ti12 ca CY Zhang, ZM Yang, YP Wang, BJ Ding PHYS LETT A 0000-00-00
Effect of high content nano-thoria addtion on the properties of tungsten electrode FZ Wang, F Zhuge, H Zhand, BJ Ding MATER RES BULL 0000-00-00
Formation and sintering behavior of nanocrystalline Fe-Ni powder by mechanical alloying WG Chen, CQ Gu, BJ Ding J IRON STEEL RES INT 0000-00-00
Effect of the microstructure of electrode materials on arc cathode spot dynamics YP Wang, CY Zhang, H Zhang, BJ Ding, K Lu J PHYS D APPL PHYS 0000-00-00
Nanocomposite W-4.5% ThO2 thermionic cathode F Zhuge, ZZ Ye, FZ Wang, YP Wang, H Zhang, BJ MATER LETT 0000-00-00
Fabrication of silicon nitride/boron nitride nanocomposite powder Wang XD; Qiao GJ; Takafumi K; Jin ZH CHINESE SCI BULL 0000-00-00
Compressive deformation of semi-solid SiCp/ZA27 composites Chen TJ, Hao YA, Sun J T NONFERR METAL SOC 0000-00-00
Ab initio investigation of structures and stability of SinCm clusters Jiang, ZY; Xu, XH; Wu, HS; Jin, ZH J PHYS CHEM A 0000-00-00
Aging behavior of Cu-Ni-Si alloy Zhao DM; Dong QM; Liu P; Kang BX; Huang JL; J MAT SCI ENG A-STRUCT 0000-00-00
An ab initio investigation on the vertical electron detachment energies of semiconductor-alkali bina Li SD; Ren GM; Jin ZH J CHEM PHYS 0000-00-00
Theoretical study of structures and stabilities of CmN2 (m=1-14) ions Jiang ZY, Xu XH; Wu HS; Jin ZH INT J MASS SPECTROM 0000-00-00
Strong machinable ceramic nano-composites with in-situ synthesized BN Qiao GJ; Li YL; Wang XD; Jin ZH KEY ENG MATER 0000-00-00
Fabrication of Si/SiC ceramic composites derived from paper Li DY; Qiao GJ; Jin ZH KEY ENG MATER 0000-00-00
Structures and aromaticities of carbon-rich semiconductor microclusters GelSimCn: An ab initio study Li SD; Yu HL; Wu HS; Jin ZH J CHEM PHYS 0000-00-00
Study of silicon carbide material bonded with oxide Wang Q; Jin ZH; Wang YL KEY ENG MATER 0000-00-00
Oxidation properties of three-dimensional (3-D) braided carbon fibers coated with SiC Gao PZ; Wang HJ; Jin ZH KEY ENG MATER 0000-00-00
Damage resistance and R-curve behavior of laminated SiC/BN ceramics Li DY, Qiao GJ, Jin ZH KEY ENG MATER 0000-00-00
Investigation of fabrication and properties of machinable Si3N4/BN nanocomposite ceramics Wang XD, Qiao GJ, Jin ZH KEY ENG MATER 0000-00-00
Fabrication and properties of Al2O3-SiAlON composites with nano-sized t- and h-BN dispersion Li YL, Qiao GJ, Jin ZH KEY ENG MATER 0000-00-00
Preparation of macroporous SiC from Si and wood powder using infiltration-reaction process Qian JM; Wang J; Jin ZH; Qiao GJ MAT SCI ENG A-STRUCT 0000-00-00
Porous 2H-silicon carbide ceramics fabricated by carbothermal reaction between silicon nitride and c Yang JF; Zhang GJ; Kondo N; She JH; Jin ZH; O J AM CERAM SOC 0000-00-00
Ti3SiC2/Al2O3 composites prepared by SPS Wang HJ; Jin ZH; Miyamoto Y CERAM INT 0000-00-00
First principles study of the structure, electronic state and stability of SinCm- anions Jiang ZY; Xu XH; Wu HS; Zhang FQ; Jin ZH CHEM PHYS 0000-00-00
Material tribo-electrification potential changing during wear Tang J; He L; Jin ZH; Lu JD MATER DESIGN 0000-00-00
Preparation and properties of porous microcellular SiC ceramics by reactive infiltration of Si vapor Qian JM, Wang JP, Jin ZH MATER CHEM PHYS 0000-00-00
First principles studies on the structures, electronic states and stability of SinCm+ cationic clust Jiang ZY; Xu XH; Wu HS; Zhang FQ; Jin ZH J MOL STRUCT 0000-00-00
Control of the interface reaction between silicon carbide and iron Tang WM Zheng ZX; Ding HF; Jin ZH MATER CHEM PHYS 0000-00-00
First principles studies on the structures, electronic states and stability of Sin-mCm clusters Jiang ZY; Xu XH; Wu HS; Zhang FQ; Jin ZH J MOL STRUCT 0000-00-00
Structure and strength of the age hardened Cu-Ni-Si alloy Zhao DM; Dong QM; Liu P; Kang BX; Huang JL; J MATER CHEM PHYS 0000-00-00
Ab initio studies on the structures, adiabatic ionization potentials and stability of SiCm-1+ cluste Wu HS; Jiang, ZY; Xu XH; Zhang FQ; Jin ZH J MOL STRUCT 0000-00-00
Thermal cyclic test of alumina/kovar joint brazed by Ni-Ti active filler Qiao GJ; Zhang CG; Jin ZH CERAM INT 0000-00-00
A study on the cycling oxidation behavior of mullite-coated silicon carbide Li SB; Lu ZL; Gao JQ; Jin ZH MATER CHEM PHYS 0000-00-00
Modeling the strengthening response to aging process of heat-treatable aluminum alloys containing pl Liu G, G. J. Zhang, X. D. Ding, J. Sun MAT SCI ENG A-STRUCT 0000-00-00
Axisymmetric Finite-Element Simulation of Grain Growth Behavior P. Z. Huang, J. Sun and Z. H. Li MODELING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING 0000-00-00
Morphological Healing Evolution of Intragranular Penny- Shaped Microcracks by Surface Diffusion: Par P. Z. Huang, Z. H. Li, J. Sun and H. Gao METALL MATER TRANS A 0000-00-00
Morphological Healing Evolution of Intragranular Penny-Shaped Microcracks by Surface Diffusion: Part H. L. Zhang, J. Sun and H. Gao METALL MATER TRANS A 0000-00-00
Evolution of Penny-shaped Microcracks by Interface Migration, P. Z. Huang, J. Sun and Z. H. Li INTERNATIONAL JOURNAL OF SOLID & STRUCTURE 0000-00-00
Evaluation of Interfacial Crack Growth in Bimaterial Metallic Joints loaded by Symmetric Three-Point F. Jiang, K. Zhao, and J. Sun INT J PRES VES PIP 0000-00-00
Fatigue Crack Propagation Normal to a Plasticity Mismatched Bimaterial Interface F. Jiang, K. Zhao, and J. Sun MAT SCI ENG A-STRUCT 0000-00-00
:J-integral and COD fracture criteria in 40CrNiMo steel under mixed mode I + II loading J. B. Sha, J. Sun and Z. J. Deng MATER SCI TECHNOL 0000-00-00
Dependence of Fracture Toughness on Multi-Scale Second Phase Particles in High Strength Al Alloys G. Liu, G. J. Zhang, X. D. Ding, J. Sun MATER SCI TECHNOL 0000-00-00
Mechanical properties of epoxy resins toughened by polyester Y. M. Cao, Y. F. Shao, J. Sun, and S. Lin J APPL POLYM SCI 0000-00-00
Density Changes of Iron during Morphological Healing Evolution of Internal Fatigue Microcracks H. L. Zhang, L. Gao and J. Sun METALL MATER TRANS A 0000-00-00
Ductile-Mode Material Removal of a Mica Glass-Ceramic [J] XinPei Ma, GuangXin Li, Lian Shen, ZhiHao Jin J AM CERAM SOC 0000-00-00
Structure and in vitro bioactivity of titania-based films by micro-arc oxidation. Han Yong, Hong Seong-Hyeon, Xu Kewei SURF COAT TECH 0000-00-00
Induction of bonelike apatite on carbon-carbon composite by sodium silicate Fu Tao,He Liping,Han Yong,Xu Kewe i. MATER LETT 0000-00-00
Reinforcing hydroxyapatite /thermosetting epoxy composite with 3-D carbon fiber fabric through RTM p Zhao Junliang, Fu Tao, Han Yong, Xu Kewei MATER LETT 0000-00-00
Effect of sprayed powder particle size on the oxidation behavior of MCrAlY materials during HVOF dep C.J. Li, W.Y. Li SURF COAT TECH 0000-00-00
Deposition Characteristics of Titanium Coating in Cold Spraying C.J. Li, W.Y. Li SURF COAT TECH 0000-00-00
Formation of nano-structured TiO2 by flame spraying with liquid feedstock C.J. Li, G.J. Yang and Z. Wang MATER LETT 0000-00-00
Relationship between the microstructure and properties of HVOF sprayed Cr3C2-NiCr coatings Keiji Sonoya, ChangJiu Li, GangChang Ji QUARTERLY J. JAPAN WELDING SOCIETY 0000-00-00
Effect of particle trajectories on the thermal radiation signal emitted by thermal spray particle fo C.J. Li, T. Wu and C.X. Li J THERM SPRAY TECHN 0000-00-00
Measurement of fracture toughness of plasma-sprayed Al2O3 coatings using a tapered double beam metho C.J. Li, W.Z. Wang and Y. He J AM CERAM SOC 0000-00-00
Potential strengthening of erosion performance of plasma-sprayed Al2O3 coating by adhesives Impregna Chang-Jiu Li, Guan-Jun Yang and Akira Ohmori J MATER SCI LETT 0000-00-00
Microstructure and Property of Al2O3 coating micro-plasma sprayed using a novel hollow cathode torch ChangJiu Li and Bo Sun MATER LETT 0000-00-00
Effect of phase transformation on cavitation erosion Resistance of some ferrous alloys Resistance of Zaiyou Wang, Jinhua Zhu METALL MATER TRANS A 0000-00-00
Effect of primary factors on cavitation erosion esistance of some austenitic metals Zaiyou Wang, Jinhua Zhu J IRON STEEL RES INT 0000-00-00
Comparative study of the detached energy of thin film on rigid substrate by blister and peel tests F. Z. Ren, G. S. Zhou, J. Yu, W. Z. Zhao, X. J ADV MATER 0000-00-00
Microstructure and properties of CuCr25 Alloys with different Ni content CY Zhang, ZM Yang, YP Wang, BJ Ding, YL Li ACTA METALLURGICA SINICA(ENGLISH LETTERS) 0000-00-00
Aging transformation in Cu-3. 2Ni-0. 75Si alloy Zhao DM; Dong QM; Liu P; Jin ZH T NONFERR METAL SOC 0000-00-00
动态结合强度试验机的研制及应用 陈坚,朱晓东, 何家文 理化检验-物理分册 0000-00-00
火电厂锅炉再热器管高温腐蚀研究 李辛庚,王学刚, 何家文 材料保护 0000-00-00
喷丸处理提高耐热钢锅炉管抗水蒸汽氧化性能应用效果的观察 李辛庚,何家文 中国腐蚀与防护学报 0000-00-00
非平衡磁控溅射沉积类石墨膜及其摩擦磨损性能研究 付永辉,朱晓东,何家文,杨世才 摩擦学学报 0000-00-00
稀土元素对La0.8Mg0.2Ni2.8Co0.6储氢合金性能的影响. 刘丽琴,唐睿,柳永宁 中国有色金属学报 0000-00-00
(MlMg)Ni4-xCo0.7Znx合金的储氢性能 唐睿,刘丽琴,柳永宁,于光 中国有色金属学报 0000-00-00
热辐射信号特征对热喷涂粒子参数测量的影响 武涛,李长久 西安交通大学学报 0000-00-00
电弧功率对液料等离子喷涂TiO2纳米涂层结构的影响 韩峰,王豫跃,杨冠军,王_,李长久 中国表面工程 0000-00-00
不同喷涂方法制备的TiO2涂层光催化降解苯酚特性 杨冠军,韩峰,李长久 热喷涂技术 0000-00-00
微束等离子喷涂Al2O3陶瓷涂层特性 李长久,孙波,韩峰,汪民 材料工程 0000-00-00
等离子喷涂水热合成处理制备氧化钛羟基磷灰石复合涂层 付涛,徐可为,憨勇 硅酸盐学报 0000-00-00
碱液处理钛合金表面软复合磷酸钙层 付涛,李金勇,憨勇,徐可为 稀有金属材料与工程 0000-00-00
溶胶-凝胶法二氧化钛薄膜诱导沉积磷酸钙层 付涛,徐可为,憨勇 硅酸盐学报 0000-00-00
钛合金表面微弧氧化膜的特点及成膜分析 黄平,徐可为,憨勇 稀有金属材料与工程 0000-00-00
有机泡沫浸渍法制备多孔羟基磷灰石复相陶瓷 赵俊亮,付涛,憨勇,徐可为 中国陶瓷 0000-00-00
单轴热压加载下云母微晶玻璃的晶体定向排列 马新沛,李光新,沈莲,金志浩 西安交通大学学报 0000-00-00
MgO-Al2O3-SiO2系高强度微晶玻璃的晶化行为与力学性能 赵永红,李光新,马新沛 硅酸盐学报 0000-00-00
云母微晶玻璃的裂纹愈合研究 李湘玲,李光新,马新沛 无机材料学报 0000-00-00
脉冲直流等离子体辅助化学气相沉积TiN和TiCN薄膜摩擦磨损特性研究 马胜利,马大衍,王昕,徐可为,介万奇 摩擦学学报 0000-00-00
反应磁控溅射MgO薄膜溅射模式的分形维表征 汪渊,徐可为 金属学报 0000-00-00
Ti-Si-N纳米复相薄膜及Si含量对脉冲直流PCVD 镀膜质量的影响 马大衍,王昕, 马胜利,徐可为 金属学报 0000-00-00
退火气氛与扩散阻挡层对Cu膜表面完整性的影响 宋忠孝,徐可为,陈华 真空科学与技术 0000-00-00
脉冲直流等离子体增强化学气相沉积Ti-Si-N纳米薄膜的摩擦磨损特性 马大衍,马胜利,徐可为 摩擦学学报 0000-00-00
Ni膜与Ti基体之间的界面结合能研究 任凤章,周根树,赵文轸,郑茂盛 自然科学进展(中文版) 0000-00-00
贝壳珍珠层不同取向弹性模量的研究 侯东芳,周根树,任凤章,郑茂盛 生物物理学报 0000-00-00
鼓泡法测量高分子和金属薄膜弹性模量的方法探讨 鞠新华,任凤章,周根树,徐可为 稀有金属材料与工程 0000-00-00
悬臂梁法测量不锈钢基体上铜膜和银膜残余应力 任凤章,周根树,赵文轸,胡志忠,郑茂盛 稀有金属材料与工程 0000-00-00
内部疲劳微裂纹退火愈合过程中纯铁的密度变化 张海龙,孙军 金属学报 0000-00-00
渗氢后再结晶状态Zr-4合金拉伸变形的原位观察 丁向东,王瑞红,刘刚, 肖林,孙军 金属学报 0000-00-00
铝合金时效—屈服强度的实验分析与模型化研究 张国君,刘刚, 丁向东, 孙军,陈康华 金属学报 0000-00-00
双界面约束下纯铝层韧脆转变行为的实验研究 韩礼红,李梁,孙军 金属学报 0000-00-00
铝合金时效—屈服强度的实验分析与模型化研究 张国君,刘刚, 丁向东, 孙军,陈康华 金属学报 0000-00-00
具有盘片状、棒针状析出相铝合金的时效—屈服强度变化模型 刘刚, 张国君,丁向东, 孙军,陈康华 稀有金属材料与工程 0000-00-00
氢化物在Zr-4合金中变形行为的研究 王瑞红,丁向东,刘刚, 肖林,孙军 稀有金属材料与工程 0000-00-00
Si3N4/BN 纳米复合粉体的制备 王向东, 乔冠军, 楠赖尚史, 金志浩 科学通报 0000-00-00
低温化学合成制备高纯纳米t-BN包AL2O3和ZrO2粉 李永利, 乔冠军, 金志浩 高等学校化学学报 0000-00-00
SiO2涂层制备工艺对三维碳纤维编织体抗氧化性能的影响 高朋召, 王红洁, 金志浩 无机材料学报 0000-00-00
SiC/Fe界面固相反应模型 汤文明,郑治祥,丁厚福,金志浩,汤涛 无机材料学报 0000-00-00
木材陶瓷研究进展 钱军民, 金志浩, 乔冠军 无机材料学报 0000-00-00
SiO2浴胶-疑胶转变过3程的动力学研究及应用 高鹏召,王红洁,金志浩 复合材料学报 0000-00-00
SiC/BN层状陶瓷耐损伤性能的研究 李冬云,乔冠军,金志浩 复合材料学报 0000-00-00
电晕处理对高性能PBO纤维的表面性能及其界面粘接性能的影响 王斌. 金志浩. 丘哲明. 刘爱华 复合材料学报 0000-00-00
木材陶瓷和Si粉原位反应烧结制备多孔SiC的研究 钱军民, 王继平, 金志浩 硅酸盐学报 0000-00-00
SiC/金属界面的固态反应和控制的研究进展 汤文明,金志浩 硅酸盐学报 0000-00-00
SiC/BN 层状陶瓷的阻力曲线行为 李冬云, 乔冠军, 金志浩 中国有色金属学报 0000-00-00
Aging transformation in Cu-3.2Ni-0.75Si alloy D. M. Zhao, Q.M. Dong ,Z, H Jin 中国有色金属学报 0000-00-00
可加工Si3N4/BN复相陶瓷的制备及性能研究 王向东, 乔冠军, 金志浩 稀有金属材料与工程 0000-00-00
反应烧结MoSi2-SIC复相材料电阻率的拓扑研究 张小立, 吕振林, 金志浩 稀有金属材料与工程 0000-00-00
SiC/C层状陶瓷的断裂行为研究 李冬云, 乔冠军, 金志浩 稀有金属材料与工程 0000-00-00
Si3N4陶瓷在不同介质中的静疲劳和循环疲劳 王红洁,金志浩 稀有金属材料与工程 0000-00-00
加载方式对Si3N4陶瓷疲劳行为的影响 王红洁,金志浩 稀有金属材料与工程 0000-00-00
PVP保护还原法制备纳米金溶胶 兰新哲,金志浩 稀有金属材科与工程 0000-00-00
反应连接碳化硅材料接头的力学和电性能 李世斌, 吕振林, 高积强, 金志浩 稀有金属材料与工程 0000-00-00
莫来石涂层对碳化硅材料高温抗氧化性能的影响 吕振林, 李世斌, 高积强, 金志浩 稀有金属材料与工程 0000-00-00
Si_2C_(m-2)(m=4_15)团簇的结构与稳定性 姜振益,许小红,武海顺,张富强,金志浩 结构化学 0000-00-00
纳米多孔无机材料的显微结构设计 张雯,王红洁, 金志浩 材料导报 0000-00-00
用X射线衍射强度测定纳米金刚石的德拜特征温度和熔点 文潮,孙德玉,金志浩 高压物理学报 0000-00-00
爆轰合成纳米石墨粉的实验研究 文潮,关锦清, 孙德玉,金志浩 西安交通大学学报 0000-00-00
纳米金刚石颗粒度的测量 文潮,李迅,孙德玉,金志浩 西安交通大学学报 0000-00-00
TZP-BN-10%Si_3N_4可加工复合材料的制备及其性能研究 李永利,乔冠军,金志浩 西安交通大学学报 0000-00-00
甲基丙烯酸甲酯- 顺丁烯二酸酐共聚物/SiO2杂化材料的制备与性能 钱军民, 金志浩 高分子材料科学与工程 0000-00-00
Al_2O_3基结构陶瓷材料裂纹自愈合研究进展 吕_,郑治祥,丁厚福,金志浩 兵器材料科学与工程 0000-00-00
纳米炭材料 管映亭, 金志浩 硅酸盐通报 0000-00-00
压痕-急冷法测定增韧氧化铝基陶瓷复合材料的抗热震性能 吕_,郑治祥,金志浩,丁厚福 理化检验.物理分册 0000-00-00
多孔C_f/A复合材料的制备与性能 陈照峰,高蓉,张立同,成来飞,金志浩 机械科学与技术 0000-00-00
黄金提取方法的环境负荷效用指数及定量评估探讨 兰新哲,金志浩,卢才武 有色金属 0000-00-00
C/C复合材料致密化制备技术发展现状与前景 管映亭,金志浩 固体火箭技术 0000-00-00
二维C/C复合材料的断裂韧性研究 李崇俊,马伯信,金志浩 固体火箭技术 0000-00-00
C/C复合材料的吸湿性研究进展 毕燕洪,金志浩 材料工程 0000-00-00
氧化锆用牙修复的研究进展 盛相军,金志浩, 王永兰 硅酸盐通报 0000-00-00
氧化物结合碳化硅复合材料的粒度级配对其性能的影响 王倩,金志浩, 王永兰 硅酸盐通报 0000-00-00
一种湿法缠绕用中温固化环氧树脂体系 王斌,金志浩 化学与粘合 0000-00-00
生物形态SiC陶瓷的研究 钱军民,金志浩 陶瓷科学与艺术 0000-00-00
C/C多孔体的制备及其对C/C-SiC-Si复合材料的影响 姜华,王继平,金志浩,王永兰 陶瓷科学与艺术 0000-00-00
反应烧结用碳化硅/酚醛树脂混合物成型特性研究 李媛,高积强 陶瓷科学与艺术 0000-00-00
TiNiNb合金的空蚀 龙霓东、朱金华 稀有金属材料与工程 0000-00-00
Ti3Al基合金的的弹性变形与空蚀 龙霓东、朱金华 中国有色金属学报 0000-00-00
亚稳奥氏体金属抗空蚀性能及其主要控制因素 王再友、朱金华 金属学报 0000-00-00
Fe-25Mn-6Si-7Cr形状记忆合金空蚀研究 王再友、朱金华 材料研究学报 0000-00-00
空蚀诱发相变对金属材料抗空蚀性能的影响 王再友、朱金华 西安交通大学学报 0000-00-00
亚稳态金属材料抗空蚀性能研究 王再友、朱金华 兵器材料科学与工程 0000-00-00
黄河沙冲击下水轮机用钢冲蚀攻角效应 王再友、朱金华 机械工程材料 0000-00-00
低层错能FeMnSiCrCu形状记忆合金的空蚀 王再友、朱金华 机械工程材料 0000-00-00
国产X70管线钢的包申格效应 李年、朱维斗 理化检验物理分册 0000-00-00
HRB355/400钢筋混凝土用热轧带肋钢筋表面纵向裂纹成因分析 李年 机械强度 0000-00-00
纳米晶AgNi合金的制备及镍从基体中脱溶现象的研究 罗群芳,王亚平,丁秉钧 金属热处理 0000-00-00
W或C添加剂对优化CuCr25合金显微组织的作用 王立彬,张程煜,丁秉钧 稀有金属材料与工程 0000-00-00
纳米晶W-La2O3电极材料的电弧特性 陈文革,丁秉钧,张晖 中国有色金属学报 0000-00-00
W-Cu触头材料的电寿命研究 陈文革,丁秉钧 电工材料 0000-00-00
纳米复合W-6%ThO2和W-2%ThO2阴极材料的性能对比 诸葛飞,王发展,张晖,丁秉钧 稀有金属材料与工程 0000-00-00
新型AgSnO2触头材料的制备和电弧侵蚀特性 徐爱斌,王亚平,丁秉钧 材料研究学报 0000-00-00
碳素形态对Ag/C触头材料组织及性能的影响 蒋鹏,王亚平,丁秉钧 兵器材料科学与工程 0000-00-00
机械合金化方法制备银镍触头材料合金的研究 罗群芳,刘丽琴,王亚平,丁秉钧 稀有金属材料与工程 0000-00-00
纳米晶W-La2O3电极材料的形成与烧结行为 陈文革,丁秉钧,张晖 稀有金属材料与工程 0000-00-00
表面处理对3Y-TZP/玻璃复相材料表面结构和化学稳定性的影响 盛相军,金志浩,王永兰 硅酸盐学报 0000-00-00
TiN Coating on the Wall of Holes and Stitches by Pulsed D.C. Plasma Enhanced CVD MA Sheng-li, XU Ke-wei, JIE Wan-qi TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 0000-00-00
Polyelectrolyte-stabilized glucose biosensor based on woodceramics as electrode Qian J.M, Suo A.L, Yao Y, Jin Z.H. CLIN BIOCHEM 0000-00-00
Preliminary study of the crack healing and strength recovery of Al2O3-matrix composites Jun L, Zheng Z.X, Ding H.F, Jin Z.H. FATIGUE FRACT ENG M 0000-00-00
Variation rule of the primary powder boundaries during the densification Wu YJ, Wang J, Lan T,Zhou L, Wu YJ, Jin ZH J ADV MATER 0000-00-00
Preparation and properties of porous microcellular SiC ceramics by reactive infiltration of Si vapor Qian JM, Wang JP, Jin ZH MATER CHEM PHYS 0000-00-00
Wear reduction mechanism of graphite and MoS2 in epoxy composites Xiubing Li, Yimin Gao, Jiandong Xing, Yu Wang WEAR 0000-00-00
Internal oxidation of dilute Cu-Al alloy powers with oxidant of Cu2O Kexing Song,Jiandong Xing, Qiming Dong, Ping MAT SCI ENG A-STRUCT 0000-00-00
Inter-phase corrosion of chromium white cast iron in dynamic state A.F. Zhang, J.D. Xing, L. Fang, J.Y. Su WEAR 0000-00-00
Wear behavior of modified surface of Ti-6Al-4V alloy treated by pulsed dcplasma-duplex process Shengli Ma, Kewei Xu, Wanqi Jie SURF COAT TECH 0000-00-00
Structural characterization of Nanocomposite Ti-Si-N coatings prepared by pulsed D.C. Plasma enhance Ma Shengli, Xu Kewei, Jie Wanqi J VAC SCI TECHNOL B 0000-00-00
Influence of Si content on nano-structured Ti-Si-N films coated by pulsed-d.c.plasma enhanced CVD? Dayan Ma, Shengli Ma, Kewei Xu SURF COAT TECH 0000-00-00
Conch shell structure and its effect on mechanical behaviors D.F. Hou, G.S. Zhou, M. Zheng BIOMATERIALS 0000-00-00
Lath martensite in 1.4%C unltra-high carbon steel and its grain size effect Zhu Jiewu Xu Yan ans Liu Yongning MAT SCI ENG A-STRUCT 0000-00-00
Study on a low-cobalt Ml(0.8)Mg(0.2)Ni(3.2)Co(0.3)A(l0.3) alloy Tang R, Zhang ZH, Liu LQ, Liu YN, Zhu JW, Yu INT J HYDROGEN ENERG 0000-00-00
Electrochemical properties of co-free Ml0.8Mg0.2Ni3.4Al0.4 hydrogen storage alloy Tang Rui Liu Yongning Zhu Jiewu J ELECTROCHEM SOC 0000-00-00
Amorphous carbon nanotubes produced by a temperature controlled DC arc discharge Liu Yongning, Song Xiaolong, Zhao Tingkai, Zh CARBON 0000-00-00
Large scale and high purity synthesis of single-walled carbon nanotubes by an arc discharge under co Tingkai Zhao and Yongning Liu CARBON 0000-00-00
The influence of gas and pressure on the formation of amorphous carbon nanotubes Zhao Tingkai, Liu Yongning, Zhu Jiewu CHINESE SCI BULL 0000-00-00
Cyclic deformation behavior and dislocation structure of Ti-2 at. Pct Al single crystals orientedfor Lin Xiao, Yukichi Umakoshi METALL MATER TRANS A 0000-00-00
Deposition of Ti-Si-N coatings in the deep blind-hole with Pulsed-d.c. Power Dayan Ma, Shengli Ma, Kewei Xu T NONFERR METAL SOC 0000-00-00
Dependence of Microstructure and Hardness of Nanocomposite Coatings of nc- (Ti1-xAlxN)/a-Si3N4 on Al Ma Shengli, Ma Dayan, Xu Kewei Transactions of Materials and Heat Treatment 0000-00-00
Optimization of spray conditions in cold spraying based on the numerical analysis of particle veloci LI Wenya, LI Changjiu, T NONFERR METAL SOC 0000-00-00
Microstructure evolution of cold-sprayed coating during deposition and through post-spraying heat tr LI Changjiu, LI Wenya T NONFERR METAL SOC 0000-00-00
Effect of substrate materials on the rutile crystalline orientation in plasma-sprayed TiO2 coatings YANG Guanjun, LI Changjiu, WANG Yu-ue T NONFERR METAL SOC 0000-00-00
Effect of flame conditions on the abrasive wear performance of HVOF sprayed nanostructured WC-12Co c WANG Yuyue, LI Changjiu T NONFERR METAL SOC 0000-00-00
Calculation of activity coefficients for components in ternary Ti alloys and intermetallics as matri Y. Zhu, Y. Q. Yang and J. Sun T NONFERR METAL SOC 0000-00-00
电极材料结构对真空弧阴极弧斑的影响 王亚平, 丁秉钧, 孙军 金属学报 0000-00-00
机械搅拌ZA27合金的结构演变和相转变 陈天建, 孙军 武汉理工大学学报 0000-00-00
约束条件下界面纯铝层裂尖应力场的数值模拟 韩海龙, 孙军 金属学报 0000-00-00
纤维体积对等离子喷涂B/Al 复合材料力学行为的影响 王豫跃,李长久 航空制造技术 0000-00-00
Zr55Cu30Al10Ni5 非晶中压力诱发结构松弛对玻璃转变的影响 佟振峰,邵跃峰,王亚平,孙军 稀有金属材料与工程 0000-00-00
第一原理对AIPm--(n+m=5)团簇结构和稳定性研究 郭玲,武海顺, 金志浩 原子与分子物理学报 0000-00-00
淀粉改性絮凝剂的合成及其在污水处理中的应用 郭玲,金志浩 山西师范大学学报 0000-00-00
泥沙对天然水体中有机污染物净化的模拟研究 郭玲,武海顺, 金志浩 山西师范大学学报 0000-00-00
Direct Evidence for Local Symmetry Breaking during a Strain Glass Transition Zhou Y.M., Xue D.Z., Tian Y., Ding X.D., Gu Physical Review Letters 2014-01-01
Sub-100 nm hollow Au-Ag alloy urchin-shaped nanostructure with ultrahigh density of nanotips for pho Liu Z., Cheng L., Zhang L., Yang Z.B ., Liu Z Biomaterials 2014-01-01
Skeletal Cubic, Lamellar, and Ribbon Phases of Bundled Thermotropic Bolapolyphiles Liu F., Prehm M., Zeng X.B., Tschierske C., U Journal of The American Chemical Society 2014-01-01
Unexpected High-Temperature Stability of beta-Zn4Sb3 Opens the Door to Enhanced Thermoelectric Perfo Lin J.P., Li X.D., Qiao G.J., Wang Z ., Carr Journal of The American Chemical Society 2014-01-01
Twinning-like lattice reorientation without a crystallographic twinning plane Liu B.Y., Wang J., Li B., Lu L., Zhang X.Y., Nature Communications 2014-01-01